Whether you're looking to add some flair to your next bag or create a fun key fob for your market booth, this double-sided tassel is super satisfying to make.
In this video tutorial, I’ll show you how to use the Sew Hungry Hippie Tassel Template—no hardware needed—to make your own custom double-sided tassel using sparkle cork and your fave fabric.
Follow along while I make one side with cork and one side with fabric. This is a fantastic scrap-busting project!
You’ll learn:
- How to use double-sided fusible web to bond cork and fabric
- Tips for cutting without damaging your mat (been there)
- How to create a loop tab for attaching to bags, key rings, or swivel hooks
- Ideas for customizing your tassel length, thickness, and shape
💡 Pro tip: These make great low-price-point items for craft shows!
What You'll Need
- Sew Hungry Hippie Tassel Making Acrylic Template
- A scrap of cork (I used Raspberry Sparkle Cork)
- A scrap of fabric for the inside
- Steam-A-Seam 2 double-sided fusible web
- Iron
- Rotary cutter with a sharp blade (or a craft blade) and a ruler
- An old cutting mat
- Super glue, hot glue, or double-sided tape
- Optional: swivel hook, O-ring, or key ring
Step-by-Step Instructions
1. Fuse the web to your cork. Place the Steam-A-Seam 2 on the wrong side of the cork and press with your iron on high heat. Let it cool for a minute.
2. Peel the paper. Once it's cool, peel the paper backing off. It should come off easily. If you're having to fight it, it's not ready yet, so give it another minute.
3. Fuse your fabric. Lay your fabric right on top of the tacky side and press to fuse. Be careful not to touch your iron plate to any exposed web.
4. Trim to size. Using your template, trim the bonded piece down so all the edges are nice and clean. A fresh blade makes a big difference here.
5. Cut the fringe. Use an old mat for this step, because you'll be cutting through both the cork and fabric and can score your mat. Lay the template on top, start in the middle, and mark where you started so you don't lose your place. Try not to shift the template, and don't press hard. You can skip a slit if you want. Then turn your piece around and finish the other side. Important: leave the top band uncut so the tassel stays in one piece.
6. Square up the bottom. Use a ruler to trim the bottom edge straight. You can trim your fringe as short or as long as you like.
7. Make the loop. Cut a narrow strip off the edge of your scrap and cut it in half. Add a tiny bit of glue or double-sided tape, wrap it into a loop, and match the ends.
8. Glue and roll. Add glue along the uncut top band, place your loop at the end, and roll it up tightly so the loop is rolled in at the top.
9. Let it dry and attach. Let the glue dry completely, ideally overnight, before adding it to a bag. Then attach it with a swivel hook, O-ring, key fob, or just tie it on.
💡 Tips:
- Use super glue or hot glue for a tassel that will get a lot of use. School glue is fine for temporary projects but won't hold up long term.
- Angle the ends of the fringe for a fancier look.
- Make it double wide for a really thick tassel, or skip the fabric for a single-sided one.
We have heavy duty high-end Tassel Hardware here.
Find our cork here, and our fabric here.
I'm using this acrylic template here.
We carry Steam a Seam here.
Shop more patterns, templates, and tools and notions in the Sew Hungry Hippie Shop.
Make a whole bunch, let them dry overnight, and you’ve got instant bag bling, key fobs, or zipper pulls ready to go.

