How to sew a see through Key Chain vinyl zipper pouch

How to sew a see through Key Chain vinyl zipper pouch



Sew a see-through vinyl key chain zipper case!

This tutorial is for sewing a see-through zipper pouch that will hold your earbuds, candy, coins, or whatever weird sh*t you need handy.

I made so many moons ago, but quicker because we're only using one piece of vinyl (10 or 12 gauge) available here.


Supplies:

One 8" x 4" piece of vinyl
One strip of 20 gauge vinyl 1/2" x 3" or so (scrap is fine)
One lobster clasp 1/2"
One four inch zipper    **#3 size zipper is best, but any size will work
Teflon sewing foot or Non-Stick foot
Wonder Clips





If you're having trouble visualizing any steps, take a peek at the original tutorial HERE .


 
Vinyl is many colors available here.



1. Place zipper face down on top of the 8"x 4" vinyl piece. Sew along this edge at 1/4" seam allowance. You might want to use Wonder Clips on this step, I personally don't because the length is so small. Remember to lock stitch. ;)








2. Fold over so zipper is facing up and finger press. Top stitch.
I did two rows because because.







3. Fold the vinyl bottom edge up over the zipper to meet the open long edge of the zipper and repeat to sew down.

This is difficult to see here, so the dashed lines are showing you the vinyl edges.





Open the zipper all the way and repeat the top stitch step here as well.





4. Take the scrap vinyl piece approx 1/2" x 3" and fold on itself so it's double thickness. Feed this through the lobster clasp opening.







Fold it down again and clip in place.



5. Fold and press pouch so it looks like the photo, there should be about 1/2" space at the top, then the zipper, then the clasp piece on one side. Make sure the zipper is open. Wonder clip in place and sew down the sides. **Make sure the zipper head is inside before you sew those sides up.

Dashed lines are where you will sew. Dashed arrow is pointing to the lobster clasp vinyl piece.
*Note the orientation of the lobster clasp.

*Zipper should be OPEN.




6. Trim off zipper. Dab Fray Check on the ends of the cut zipper to keep them from fraying.






7. Turn right sides out again and enjoy your new pouch. It does help turning if the vinyl is warm, so either sit in the sunshine, use a hair dryer, or do like me and sit next to the radiator and let the vinyl warm before turning. It's much more malleable.















We put ours on backpacks, key chains, in my purse, and in the car. You never know when you might need some Starbursts.





HAPPY SEWING






Back to blog

1 comment

I don’t understand where the yellow zipper tabs picture fits in, are we supposed to add zipper tabs? When? I don’t see them on the finished pouch :/

Michele

Leave a comment